DSM Productions Limited

The Freedom PAR Tri-6 is a truly 100% wireless, battery-operated, tri-colour LED wash fixture. It can be used as an uplighter on the floor or suspended overhead. It has a compact design that works with TRUSST and all other 12" box trussing, while the adjustable kickstand allows for easy floor placement. The 18 watts of RGB colour mixing and can be operated with the included CHAUVET DJ IRC-6 remote or via the on-board control panel. The built-in wireless D-Fi transmitter and receiver allow wireless control with a D-Fi compatible controller, such as the Obey 40 D-Fi (sold separately). TRUE wireless, battery operated, tri-colour LED Par with built-in D-Fi transceiver Works in Master/Slave with first generation Freedom PARs Shine light where it is needed using the built-in adjustable kickstand Built-in glare shield prevents light spillage LED battery level indicators Extend the battery's runtime and lifespan with built-in limiter circuitry and discharge protection Convenient, wireless non-DMX control using the IRC-6 remote (included) Create customized colours using the built-in 4 Button menu system and LED display Achieve smooth LED fading with built-in dimming curves Safely store and transport your fixtures from gig to gig in the CHS-FR4 carry bag (sold separately) Light Source: 6x 3W Tri-colour LEDs (RGB) DMX Channels: 3, 4, 5, or 9 selectable Strobe rate: 0 to 17Hz PWM frequency: 1.2kHz Beam angle: 15° Field angle: 29° Maximum run time: up to 8 hours all on, up to 20 hours single colour Recharge time: 6 hours Operating frequency: 2.412GHz to 2.484GHz Illuminance: 1,938 lux @ 2m 3 Pin XLR DMX in/out IEC Power linking: Up to 17 units @ 120V or 30 units @ 230V Power supply: 100-240V AC, 50/60Hz (auto-ranging) Dimensions (WxHxD): 138x184x145mm Weight: 2.6kg