JAS Productions Scotland

he 3 RU two channel D12 amplifier delivers medium to high power into low impedance loads between 4 and 16 ohms and is ideally suited for use in both mobile and installation environments. The D12 contains setups for all d&b loudspeakers and a linear mode. The signal delay capability enables user definable settings of up to 340 msec (=100 m/328.1 ft) to be applied independently to each channel. The same applies to the 4-band parametric equalizer, providing optional boost/cut or notch filtering. The D12 incorporates a digital rotary encoder and a LCD display to configure the amplifier.

The D6 contains configurations for d&b loudspeakers and a linear mode; exceptions are 2-Way Active, V-Series and B2-SUB. The signal delay capability enables user definable settings of up to 340 msec (=100 m/328.1 ft) to be applied independently to each channel. The same applies to the 4-band parametric equalizer, providing optional boost/cut or notch filtering. The D6 incorporates a digital rotary encoder and a LCD display to configure the amplifier.

Frequency range: 50 - 18,000 Hz Polar pattern: super cardioid Switchable bass cut/ boost Nominal impedance: 150 Ohm, balanced Sensitivity: 22 mV/ Pa (-30 thomann dBV) Peak SPL: 120 dB Operating voltage: 12 V to 48 V phantom power 3-pin TQG connector Robus

For live applications and reportage Includes a switch Polar pattern: Cardioid Frequency range: 80 - 15,000 Hz Impedance: 350 Ohm Sensitivity: 1.5 mV/Pa Dimensions: 48 x thomann 180 mm Weight: 330 g Incl. Clamp and bag

Sennheiser EW512 G3 : Features Sturdy metal housing (transmitter and receiver 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception Enhanced frequency bank system with up to 32 compatible frequencies Ethernet port for connecting

This system includes: 4 x Sennheiser EM500 G3 receivers, rackmounted in a high quality black 3U flightcase together with 1 x Sennheiser ASA1 active antenna splitter. An integrated Sennheiser NT1-1-UK power supply provides DC power for all receivers and is

This system includes 8 x Sennheiser EM500 G3 receivers, rackmounted in a high quality black 6U flightcase together with 2 x Sennheiser ASA1 active antenna splitters. 2 x integrated Sennheiser NT1-1-UK power supplies provides DC power for all receivers and

Sennheiser EW512 G3 : Features Sturdy metal housing (transmitter and receiver 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception Enhanced frequency bank system with up to 32 compatible frequencies Ethernet port for connecting

Characteristic: Omnidirectional Frequency range: 20-20,000 Hz Individually adjustable Mini jack connector for Sennheiser EW series Sensitivity 150 dB max. Colour: Beige Weight: 6.5 g

Sennheiser ME4 - Features: 1/8 inch (3.5mm) Mini (TRS) Output Jack Works with Sennheiser Evolution 100, 300 and 500 series bodypack transmitters Warm, clear sound quality

With 16 mm capsule Cardioid characteristic Frequency response 50-20000 Hz 48V Phantom power required With low cut (-3 dB @ 75 Hz o. 150Hz) thomann and pad switch (-10 dB o. -20dB) Sensitivity: -42 dB (7.9mV/Pa) Max. SPL: 135 dB Incl. windscreen and shock mount In a case

16 Outputs 32 Mic Preamps 8 Stereo FX Returns 6 Matrix Busses with Insert 6 Mute groups 8 DCA groups 32x32 Channel Audio Interface (USB) 100 mm thomann Motor Fader 7" TFT Colour Display LCD Display per Channel EQ per Channel Adjustable Delays in all chann

Mic/Line inputs: 10 Line inputs: 8 mono + 4 stereo Mixer input channels: 16 Group busses: 4 AUX busses: 3 Main busses: Stereo Total harmonic distortion (THD+N): Less than 0.1%, 20Hz-20kHz Frequency response: 0, +1, -3dB, 20Hz-20kHz Equivalent input noise (EIN): -128dBu Residual output noise: -98dBu Crosstalk (1kHz): -70dB Power supply adaptor: PA-30 AC adaptor (AC35VCT, 1.4A); 120V; 50/60Hz Power consumption: 30W Dimensions: 478x105x496 mm Net weight: 5.3 kg

Adam Hall SLED 1 Ultra XLR 4, 4 pin XLR gooseneck lamp with 4 white COB LEDs Flexible 300 thomann mm gooseneck, On/off switch 6000 - 6500 K Straight 4pin XLR connector

Decksaver Behringer X32 Compact Dust Cover for Behringer X32 Compact, Dimensions 63,5 x 53,8 x 6,2 cm Weight 1,3 Kg

JM 27 Superlux ECM999 Superlux HI10 The t.bone EM9600 The t.bone SC 140 / Stereo Set The t.bone EM700 / Stereo set

K&M of 215M10 thread adapter from M10 to 5/8"

4-Pin connector / adapter Professional workmanship Connecting two cables together Speaker Twist Suitable for 2-pin and 4-pin Speaker Twist plug

1 Channel Operatable with battery or phantom power Pad switch (0 dB/ -30 dB) Input jack link Balanced XLR output 5 year manufacturer's warranty

Passive omni-directional external antenna for transmitting and receiving at frequencies between 450 and 960 MHz. A threaded 3/8inch socket enables mounting on a standard mic stand.