is a HireHop user.
Motors & Control |
|
|
|
|
Rigging Accessories |
|
|
|
|
|
|
|
Duratruss DT Pro Swivel Clamp 500kg
The DURATRUSS PRO Swivel clamp has been designed to connect two round pipe or tubes with a diametric for 48-51mm and can le loaded with max. 500 kg. In additon, these swivel coupler can be fixed by a steel spring pin on a 90° twisted position.
Hire price from : €5.00
|
|
DuraTruss DT Truss-Adapter-30/40
The universal truss adapter is suitable for truss systems DT 33, DT34, DT 43 and DT 44. The two truss clamps can be moved on the U-profile.When using the DT Truss adapter 30/40 please pay attention to the maximum load of the suspension point. This may not be exceeded in any case.max load: 1000kg
Hire price from : €5.00
|
|
|
|
L-Acoustics KARA M-BAR
The L-ACOUSTICS® M-BAR extension bar is a complementary rigging element for M-BUMP. Optionally used as a
single element or in pair in flown configurations, it will extend the site angle capability of KARA and SB18 arrays. In
stacked configurations, its use is required in pairs as part of the stacking platform
Hire price 0
|
|
L-Acoustics KARA M-BUMP
Frame for flying or ground-stacking a vertical SB18 and/or KARA array, provided with 2 bow shackles (Ø19mm)
Hire price 0
|
Stands |
|
Kuzar K-1 Telescopic Lifter 3.8m 125kg
Manufactured in Europe to both BGV C1 and CE (2006/42/CE) standards. Designed for the professional user in the event and rental industry, the wind up stands feature automatic locks for increased safety. The K-1 has 4 foldable legs which slide open, to four legged tripod type configuration suitable for lifting loads of up to 125kg, to a maximum height of 3.8m. Ideal for lifting lighting systems and structures, and fully suited to operate indoors or outdoors.
Hire price from : €15.00
|
Truss |
|
DuraTruss DT 34-BPM - base plate male
The DT34 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips.
Hire price 0
|
|
DuraTruss DT 34/2-C22-L120 - 2 way corner 120°
The DT34 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips.
Hire price from : €5.00
|
|
DuraTruss DT 34/3-050 0.5 m truss element
The DT34 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips.
Hire price from : €2.50
|
|
Duratruss DT 34/3-100 1 meter truss element
The DT34 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips.
Hire price from : €5.00
|
|
Duratruss DT 34/3-200 2 meter truss element
The DT34 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips.
Hire price from : €10.00
|
|
DuraTruss DT 34/3-C21-L90 - 2 way corner 90°
The DT34 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 50mm aluminum tube with a wall thickness of 3mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips.
Hire price from : €5.00
|
|
Duratruss DT 34/3-C30-LD90 3 way corner 90°
The DT34 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 50mm aluminum tube with a wall thickness of 3mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips.
Hire price from : €5.00
|
|
DuraTruss DT 34/3-T35T - 3 way T-joint
The DT34 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling.
Hire price from : €5.00
|