is a HireHop user.
Other Sound |
|
|
|
|
|
|
|
|
|
Palmer PAN 02 DI Box active
Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation.
Hire price from : €5.00
|
|
Palmer PAN 03 19" DI Box 4-channel active
Active 4-channel DI box. Each channel has a jack input with a parallel output for passing through the signal. An attenuation switch (-30 dB) allows either a line or loudspeaker signal to be connected.Active 4 x DI box, 19" format. Technical specitications identicl to the PAN-02, however, the PAN-03 is built for mains operation. All connections and switches are located on the front panel, an additional parallel XLR output is located in back. 19 inch rack-mount format, 1 rack space, 90 mm front to back.
Hire price from : €10.00
|
|
Palmer PAN 04 DI Box 2-channel passive
The PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell „THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.
Hire price from : €5.00
|
Outboard |
|
|
|
Midas DL251
48 Input, 16 Output Stage Box with 48 Midas Microphone Preamplifiers
Hire price from : €50.00
|
|
|
Power Distribution |
|
Botex PSA 321 Power Distributor
Sheet steel housing and metal front panel
Powder coated with black epoxy
Installation size: 19"/ 3 HE
Digital 4-digit voltage and ampere display per phase
Residual current circuit breaker FI32A 4-pin, 0.03 A
6 Circuit breakers 16 A"C"
nput: 1.5 m cable with CEE 32A plug
Outputs: CEE 32A built-in sockets
6x 16 A safety plugs (2 pcs per phase)
Hire price from : €10.00
|
|
RiedConn STG32/02-6/2K/FI Solid Rubber Power Distributor
Carrying handle
Protection class: IP40 / for indoor use only
Connection: Plug CEE32A 400V 5p, with approx. 2m rubber cable H07RN-F 5G4
Outputs: 2 Surface-mounting sockets CEE16A 400V 5p., 6 safety sockets 230V 16 A with hinged lids
Fuse protection: 1 RCD 40/0.03 4p, 6 LS C16A 1p (each 3 Schuko per CEE parallel), 3 phase lights, hinged cover for fuse protection
Clear labelling
Colour: Black
Hire price from : €10.00
|
|
|
Projectors & Accessories |
|
BenQ MW632ST 3200-Lumen WXGA Short-Throw DLP Projector
Display a large image close to the screen with the BenQ MW632ST 3200-Lumen WXGA Short-Throw DLP Projector. It features a throw ratio of 0.72 - 0.87:1 to achieve this, increasing placement flexibility while reducing shadows on the screen. Its 13,000:1 contrast ratio is designed to enhance detail for sharper text, graphics, and video. The projector's connectivity options include VGA, S-video, composite, and HDMI video inputs, plus analog audio inputs, and VGA and analog audio outputs.
Hire price from : €50.00
|
Rigging Accessories |
|
|
|
|
|
|
|
Duratruss DT Pro Swivel Clamp 500kg
The DURATRUSS PRO Swivel clamp has been designed to connect two round pipe or tubes with a diametric for 48-51mm and can le loaded with max. 500 kg. In additon, these swivel coupler can be fixed by a steel spring pin on a 90° twisted position.
Hire price from : €5.00
|
|
DuraTruss DT Truss-Adapter-30/40
The universal truss adapter is suitable for truss systems DT 33, DT34, DT 43 and DT 44. The two truss clamps can be moved on the U-profile.When using the DT Truss adapter 30/40 please pay attention to the maximum load of the suspension point. This may not be exceeded in any case.max load: 1000kg
Hire price from : €5.00
|
|
|