Tour Moon Productions Ltd

Single channel 5 pin DMX controlled or manual dimmer unit with a 16A in/out. Option for switching mode (default dimming) & preheat on/off (default off). Comes with a 13A to 16A adaptor.

Single channel DMX dimmer perfect for using with standalone fixtures with its built in fader, or as a location dimmer with DMX control. Adjustable dimmer preset/limit and dim/switch selection. Comes with 16A input, 3-5 pin DMX adaptors and 1x IEC - 16A adaptor.

3 channel dimmer that can be used for set and forget situations with its local fader control, or controlled by 5 pin DMX. 13A power input, and 3x 15A output sockets, with 6.3A max load per channel. Comes with 3x 15A to 16A adaptors.

This pebble convex unit gives a beam which is soft edged but better defined than a fresnel unit with very little light outside the main beam area, with a 6-57° beam angle. Comes with barn doors and 16A power input.

5x PAR30 lamps, individually controllable via DMX. Has PowerCON in/out and 5 Pin DMX in/out. Can be stacked in linear array up to two units tall using M10 bolts. Comes with 16A to PowerCON.

750W lamp. body and yoke only, and comes with adjustable framing shutters. 16A thru plug.

750W lamp included, and comes with adjustable framing shutters and gel frame. Gobo holder, gobos and top hats available. 16A thru plug.

750W lamp included, and comes with adjustable framing shutters and gel frame. Gobo holder, gobos and top hats available. 16A thru plug.

750W lamp included, and comes with adjustable framing shutters and gel frame. Gobo holder and gobos available. 16A thru plug.

575W lamp. Comes with adjustable framing shutters and a gel frame as standard. 16A thru plug.

Lens comes with gel frame as standard.

575W lamp. Comes with barn doors. On 16A Thru

20x E27 lamp holders, 1m apart.

10x E27 lamp holders, 2m apart.

A detailed miniature/birdie Parcan. Ideal for small stage settings, bar, retail and exhibition use, supplied with gel frame. IEC input.

A detailed miniature/birdie Parcan. Ideal for small stage settings, bar, retail and exhibition use, supplied with gel frame. IEC input.

10x 75W GU10 lamps, with adjustable mounting/floor brackets. On PowerCON in/out and 3 pin DMX in/out (comes with 3 pin to 5 pin DMX adapters).

12 x 10-Watt 6-in-1 LED batten with full pixel control and a 40-degree beam angle. 3 pin DMX and IEC in/out (comes with 5 pin DMX adaptors).

200W LED Profile variable Zoom 17-50° with PowerCON in/out and 3 pin DMX (comes with 5 pin DMX adaptors).

Battery-powered LED pin spot with a strong magnetic base, floor stand, suspended ceiling clamp and IR remote control. Usually in a case of 6 units with charger.