Amplifiers to hire or rent

The two channel D12 amplifier contains setups for all d&b loudspeakers and a linear mode. NL4 connectors for each channel.

The four channel D80 amplifier contains configurations for all d&b loudspeakers and a linear mode. An NL8 provides all outputs on a single connector, while individual outputs are NL4 connectors.

The two channel D6 amplifier contains configurations for d&b loudspeakers and a linear mode; exceptions are 2-Way Active, V-Series and B2-SUB. It is supplied with two NL4 loudspeaker output connectors.

The single channel DSP based E-PAC power amplifier for single loudspeaker configurations and multichannel applications. The E-PAC provides set-ups for all current d&b loudspeakers (except for active systems, B1 and B2 subwoofers) and a linear mode that can be selected for MAX/MAX12 or other passive loudspeakers using a single NL4 output connector.

The P1200A mainframe has a maximum output power 2 x 600 W into 4 Ohms using two NL4 connectors. Used with d&b C or E-Series loudspeakers, the mainframe can be fitted with either one loudspeaker controller module plus the mono option, or two loudspeaker controller modules.

This four channel Class D mobile amplifier provides the power density required for high-efficiency d&b systems including the KSL System, V-Series, Y-Series and T-Series. The D40 incorporates comprehensive loudspeaker management, switchable filtering functions as well as user definable equalization and delay capabilities. Onboard enhanced energy saving features, power efficiency and Automatic Wake up enable you to save on resources and meet environmental responsibility requirements. The D40 incorporates up to eight input channels with four analogue inputs and four AES3 channels with corresponding link outputs. Each input channel can be routed to any of the output channels.

Please call for info.

The two channel D12 amplifier contains setups for all d&b loudspeakers and a linear mode. NL4 connectors for each channel.

The four channel D80 amplifier contains configurations for all d&b loudspeakers and a linear mode. An NL8 provides all outputs on a single connector, while individual outputs are NL4 connectors.

The two channel D6 amplifier contains configurations for d&b loudspeakers and a linear mode; exceptions are 2-Way Active, V-Series and B2-SUB. It is supplied with two NL4 loudspeaker output connectors.

The single channel DSP based E-PAC power amplifier for single loudspeaker configurations and multichannel applications. The E-PAC provides set-ups for all current d&b loudspeakers (except for active systems, B1 and B2 subwoofers) and a linear mode that can be selected for MAX/MAX12 or other passive loudspeakers using a single NL4 output connector.

The P1200A mainframe has a maximum output power 2 x 600 W into 4 Ohms using two NL4 connectors. Used with d&b C or E-Series loudspeakers, the mainframe can be fitted with either one loudspeaker controller module plus the mono option, or two loudspeaker controller modules.

This four channel Class D mobile amplifier provides the power density required for high-efficiency d&b systems including the KSL System, V-Series, Y-Series and T-Series. The D40 incorporates comprehensive loudspeaker management, switchable filtering functions as well as user definable equalization and delay capabilities. Onboard enhanced energy saving features, power efficiency and Automatic Wake up enable you to save on resources and meet environmental responsibility requirements. The D40 incorporates up to eight input channels with four analogue inputs and four AES3 channels with corresponding link outputs. Each input channel can be routed to any of the output channels.

Please call for info.

Please call for info.

The Crown Macro-Tech i Series offers amazing power, light weight and ease of use for touring sound applications. The series includes onboard analog signal processing and a built-in network connection.

The Crown Macro-Tech i Series offers amazing power, light weight and ease of use for touring sound applications. The series includes onboard analog signal processing and a built-in network connection.

The 3 RU two channel D12 amplifier delivers medium to high power into low impedance loads between 4 and 16 ohms and is ideally suited for use in both mobile and installation environments. The D12 contains setups for all d&b loudspeakers and a linear mode. The signal delay capability enables user definable settings of up to 340 msec (=100 m/328.1 ft) to be applied independently to each channel. The same applies to the 4-band parametric equalizer, providing optional boost/cut or notch filtering. The D12 incorporates a digital rotary encoder and a LCD display to configure the amplifier.

The 2 RU two channel lightweight D6 amplifier delivers medium power into low impedance loads between 4 and 16 ohms and is ideally suited for use in both mobile and installation environments. The D6 contains configurations for d&b loudspeakers and a linear mode; exceptions are 2-Way Active, V-Series and B2-SUB. The signal delay capability enables user definable settings of up to 340 msec (=100 m/328.1 ft) to be applied independently to each channel. The same applies to the 4-band parametric equalizer, providing optional boost/cut or notch filtering. The D6 incorporates a digital rotary encoder and a LCD display to configure the amplifier.

The 2 RU four channel D20 amplifier is ideally suited to mobile and installation applications which require low to medium Sound Pressure Level (SPL) capabilities. The D20 features the same Digital Signal Processing (DSP) platform as the latest generation of d&b amplifiers, containing configurations for all d&b loudspeakers except the J-Series and the M2 monitor, plus a linear mode.