Rigging Services

For consistent performance event after event, professional riggers rely on the Lodestar. Low voltage control of loads up to 500kg with speeds of 4 metres per minute. Other speeds available upon request. Supplied with 20, 25 or 30 metres of load chain.

For consistent performance event after event, professional riggers rely on the Lodestar. Low voltage control of loads up to 1000kg with speeds of 4 metres per minute. Supplied with 20m of load chain.

For consistent performance event after event, professional riggers rely on the Lodestar. Low voltage control of loads up to 1000kg with speeds of 4 metres per minute. Supplied with 20, 25 or 30 metres of load chain. Double-brake option also available.

For consistent performance event after event, professional riggers rely on the Lodestar. Low voltage control of loads up to 2000kg with speeds of 4 metres per minute. Supplied with 20, 25, or 30 metres of load chain.

The CM Prostar is designed for the unique rigging applications at small venues. Low voltage control of loads up to 136kg with speeds of 4 metres per minute. Supplied with 10, 15 or 20 metres of load chain and bag.

The CM Prostar is designed for the unique rigging applications at small venues. Low voltage control of loads up to 250kg with speeds of 4 metres per minute. Supplied with 10, 12, 15, or 20 metres of load chain and bag.

Distro cables available in the following lengths: 2, 5, 10, 15, 20, 30, and 40 metre lengths. Male/female CEE-4pin red connectors. Durable and flexible.

Galvanised wire rope sling with thimble eyes at each end. Available in the following working lengths: 1, 2, 2.5, 5, 10, 20, 30, 40, and 50 foot lengths.

Polyester round sling protected by a black non-load bearing sleeve. Working load limit is 2 tonnes and is available in several working lengths: 0.5, 1.0, 1.5, 2.0, and 3.0 metres.

Galvanised wire rope sling with thimble eyes at each end. Available in the following working lengths: 2, 5, 10, 20, 30, 40, and 50 foot lengths.

Forged alloy steel â?“ quenched and tempered, with alloy pins. Working load limit permanently shown on every shackle. Jaw width is 20mm.

Forged alloy steel â?“ quenched and tempered, with alloy pins. Working load limit permanently shown on every shackle. Jaw width is 27mm.

Forged alloy steel â?“ quenched and tempered, with alloy pins. Working load limit permanently shown on every shackle. Jaw width is 32mm.

Extruded aluminium coupler designed to fit 50.8mm O/D trussing and tube without damaging it, and close down onto 48.4mm scaffolding tube without any reduction in the 500kgs safe working load. Couplers are connected by a zinc plated turned steel rivet.

The Doughty 90 degree fixed coupler provides a firm fixing between two perpendicular bars. Manufactured from high tensile aluminium extrusion. Suitable for tube diameters of 48-51mm. Safe working load is 750kg.

The Doughty hanging clamp is supplied fitted with an eye nut. This clamp is ideal for suspending wire hung loads. Manufactured from high tensile aluminium extrusion. Suitable for tube diameters of 48-51mm. Safe working load is 340kg.

The Doughty 360 degree swivel coupler provides a firm fixing between two perpendicular bars. Manufactured from high tensile aluminium extrusion. Suitable for tube diameters of 48-51mm. Safe working load is 750kg.

This extra-heavy-duty chain bag is made from black Topspan and has a semi-rigid padded base and steel-reinforced rigid neck. 50mm wide webbing encircles the entire bag. Supplied with a double-action snap hook for connection to winches, eyebolts or slings.

The 30 series is designed as a lightweight, light to medium duty truss system that is used in the installation, rental and exhibition market. As a Prolyte supplier, Rigging Services provides all the necessary kit required to complete your structure.

The 50 series is a heavy-duty solution for structures that have to meet high load-bearing demands and are subjected to high-frequency use. As a Prolyte supplier, Rigging Services provides all the necessary kit required to complete your structure.